Props to OIS for sending me this ID to review

[Certainty] Very High, comparing with multiple physicals in hand

[Communication] - 10/10 Fast replies and answered all my questions

[Cost: 3/10] For $100 this ID is NOT worth it. Get something else that OIS sells

[Shipping/Stealth: 10/10] Got rush and once it shipped it showed up quickly. Stealth is also good and passed customs, what else can I say

[Signature: 5/10] Placement is good but it is too thick. Also is it WAY too raised. BC laser engraves(?) their signatures so you can barely feel them but this one jumps off the ID

[Template: 5/10] I'm comparing this up close to a physical and have made a list of all the issues I can find

• The sides of the template fade off too early especially on the lower left and right

• Coloring of the background is slightly faded on the lower half

• All text is printed in dark black ink where on a real ID it is all laser engraved and slightly more grey. Printing in an off black/gray would probably make this less obvious

• Raised name is a little too raised and fairly thicker than a real, it seems like it is bolded when it shouldn't be

• Design on the back should be raised up by 0.5mm give or take and fade off later on the left. Also should be darker

• 1D raised barcode on the back is too raised. It should be half of what's currently being done

• The positives are that fonts and placement for the most part are correct and the raised PHN on the back feels exactly like the real thing. Microprint is also pretty much the same as a real except the yellow in the sun which seems to be little blobs

• There's a bit of hair under the back of one of my copies

[Photoshop: 6/10] Picture is not faded out as much as it should be (bump it by 15%ish)

[Holograms: 9/10] The sticker on the back looks spot on. Like damn it's perfect. However it is placed slightly too low

[UV: 8/10] Correct pattern and placement but it's muddy comparing to a real ID

[Lens: 2/10] No vendors have a good lenticular lens but this is literally a sticker I half peeled off. This should raise flags even for someone who has never seen a BC ID before. One of my copies had the sticker pretty well secured though

[Scanning: 10/10] No issues scanning, haven't tried any club scanners and don't plan to. If nani wants to check it out I'm happy to send it to him

[Conclusion: 4.5/10] The ID is obviously the wrong material(PVC) and the whole thing is way too shiny when it should be matte. Canadian IDs are pretty high security and there's a tiny market for them so I can understand why there are so many shortcomings here and really can't blame him for not investing in a big sexy laser engraver. You could probably even use it somewhere far away in the states or in Canada cause no one gives a shit but OIS makes some fire IDs so go buy one of the others, just not this one.

[Pics] https://anonfile.com/Q2h8H5qfb5/b_png https://anonfile.com/Odh5Hbqab0/a_png